A look inside a fully local, cloud-free Home Assistant installation — 1,900 entities, 66 automations, 20 rooms, and a Raspberry Pi 4 running the whole house.

Printed holder mounts the Aqara Motion Sensor P1 to standard US 1" × ¼" peg board — quick to reposition wherever peg board is present.

Blocks internet access per-device on a schedule using OpenWRT nftables rules, with a Home Assistant dashboard toggle for manual overrides — no third-party apps or cloud dependency.

ESP32 ESPHome device that monitors a Carrier furnace — reads a differential pressure sensor for filter restriction and a phototransistor to decode blink error codes from the status LED.

ESPHome config for an ESP32 Wiegand keypad reader built on a thin-edge philosophy — the device only captures input and relays it to Home Assistant; all access-control logic stays in the hub.

Wall-mounted friction-fit holder for the Bond Bridge BD1000 RF blaster — quick mount and unmount to a wall panel for home automation use.

Slim snap-fit case for the Wemos D1 Mini ESP8266 — optionally adds external LED holes and a 6.5mm clip for mounting to a laptop display. Pairs with ESPHome and Home Assistant as a simple status indicator.

Two ESPHome configs for a SONOFF S31 smart plug that auto power-cycles a device when it stops responding — one using ICMP ping loss detection, one using Home Assistant API connection loss.

Clip-on holder turns an Aqara Water Leak Sensor into a Christmas tree bowl water level monitor — no more dry trees.